*************************************************************************************************************************
ALDEN LEEDS, INC. PRODUCT CODE # 3103 MATERIAL
55 JACOBUS AVE. PRODUCT NAME: DEFOAMER SAFETY DATA
SO. KEARNY, NJ 07032 SHEET
(973) 589-3544 8/10/00
*************************************************************************************************************************
SECTION I - IDENTIFICATION
CHEMICAL NAME & SYNONYMS: Silicone Dispersion
CHEMICAL FAMILY: Silicone Emulsion
TRADE NAME: Spa*rkle Defoamer and Private Label
DESCRIPTION:
Off white liquid; odorless.
CAS NO. N/A
*************************************************************************************************************************
SECTION II - PHYSICAL DATA
Boiling Point:
212F
Freezing Point: N/A
Vapor Pressure (mm Hg):
30mm
Specific Gravity (H2O=1): 1.01
Solubility in water:
Greater than 90% % Volatile by Volume:
over 10
*************************************************************************************************************************
SECTION III - FIRE AND EXPLOSION HAZARD DATA
Flash Point:
N/A
Autoignition Temp: N/A
Flammable Limits in Air % By Volume: N/A Extinguishing Media: Carbon dioxide or foam.
Special Fire Fighting Procedures: None Unusual Fire and Explosion Hazards: None
*************************************************************************************************************************
SECTION IV - HEALTH HAZARD DATA
EFFECTS OF OVEREXPOSURE:
May cause mild skin irritation and temporary discomfort to eyes.
*************************************************************************************************************************
SECTION V - EMERGENCY AND FIRST AID PROCEDURE
SKIN: Wash off with water or shower.
EYE: Flush with water for at least 15 minutes. Consult a physician if irritation persists.
*************************************************************************************************************************
SECTION VI - REACTIVITY DATA
Stability:
Stable
Conditions to Avoid: None
Incompatibility (materials to avoid): N/A
Hazardous Polymerization: Will not occur.
Hazardous Decomposition: SiO2, CO2, and traces of incompletely burned carbon products.
*************************************************************************************************************************
SECTION VII - SPILL, LEAKAGE & DISPOSAL PROCEDURES
Steps to take if material leaks or spills: Mop, wipe or soak up with absorbent material.
Waste disposal method:
Dispose of in approved landfill or burn in accordance with all Federal, State and Local regulations.
*************************************************************************************************************************
SECTION VIII - SPECIAL PROTECTION DATA
Ventilation: Local ventilation is adequate.
Eye Protection: Use goggles or face shield.
Protective Gloves:
Use rubber gloves. Respiratory Protection: Not required.
Other Equipment: Eye wash fountain should be located near work area.
*************************************************************************************************************************
SECTION IX - SPECIAL PRECAUTIONS DATA
Handling and Storage: Store in a cool, dry place and keep from freezing.
Other: Avoid contact with eyes.
*************************************************************************************************************************
SECTION X - TRANSPORTATION INFORMATION
This material is not a hazardous material and is not regulated by the D.O.T. For all transportation accidents, call CHEMTREC at 800-424-9300.
*************************************************************************************************************************
The information herein is given in good faith but no warranty, expressed or implied, is made.
*************************************************************************************************************************
ALDEN LEEDS, INC.
55 JACOBUS AVE. SO. KEARNY, NJ 07032
24 HOUR EMERGENCY PHONE: CHEMTREC 800-424-9300
|
